Forklift Training Programs British Columbia

Forklift Training Programs British Columbia - If you are searching for work as an operator of a forklift, our regulatory-compliant lift truck training programs offer excellent instruction in numerous types and styles of forklifts, lessons on pre-shift inspection, fuel kinds and handling of fuels, and safe use of a forklift. Practical, hands-on training assists participants in obtaining basic operational skills. Course content covers current rules governing the operation of forklifts. Our proven forklift courses are meant to offer training on these types of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

How to Handle Loads Safely

Do not lower or raise the fork whilst the lift truck is moving. A load should not extend over the backrest because of the danger of the load sliding back in the direction of the operator. Inspect for overhead obstructions and make certain there is adequate clearance before raising a load. Stay away from overhead power lines. When the load is raised straight up, tilt it back slightly.

When the load is raised the lift truck would be less stable. Make sure that no pedestrians cross under the elevated fork. The operator should not leave the forklift while the load is lifted.

The forks should be level when handling pallets, and high enough to extend all the way into and under the load. The fork's width must provide equal distribution of weight.

Set the brakes and chock the wheels before loading and unloading the truck. The floors should be strong enough to support the weight of both the load and the forklift. Fixed jacks can be installed to be able to support a semi-trailer which is not coupled to a tractor. The height of the entrance door must clear the height of the forklift by at least 5 cm. Mark edges of rail cars, ramps or docks and avoid them.

If there is not proper ventilation into the forklift, do not stay in there for long periods. The trucks interior should have enough lighting and be free of obstructions. Check the flooring of the forklift cab for holes. The installation of material that are non-slip on the floor will help prevent slipping. Clear whatever obstacles from docks and dockplates and make certain surfaces are not oily or wet.

Lift trucks must not be utilized to push or tow other forklifts.

Click to Download the pdf